Part P Electrical Installation Testing Kit Kewtech Part P Test

Continuity measurement to 200andohm Insulation measurement to 200Mandohm at 500V Loop impedance measurement to 2000andohm uses rolling average 11 RCD test current ranges 0anddeg and 180anddeg phase switch for optimum testing Displays mains voltage before test Lock down test button for hands free testing Protected against phase to phase connection Instant correct wiring status check Complies with BS7671 Part P The KT61 is an insulation continuity and loop impedance tester and an RCD tester combined into one unit. It allows the user to test the safe installation of their work. It will test the resistance and insulation of installed cables. The safe levels of resistance while the circuit is live and the maximum potential or fault current of the installed circuit and that the circuit is adequately protect by carrying out a function test on the protective RCD installed at the fuse board.The KT61 is used by Electricians Electrical Contractors and Engineers. Due to Part P they are also used by Plumbers Heating Engineers Kitchen Fitters Builders and bathroom fitters. The KT61 is particularly popular amongst the non electrical trade people due to its competitive price ease of use and accuracy.Kit Includes KAMP 13 mains lead ACC016E 3 Wire distribution board test lead ACC020 test leads Batteries Test lead pouch Carrying strap Large carrying case Instruction Manual Certificate of Conformity.